MF In Line Gas Flow Meters

MF series In-line flow meters are designed for all purpose industrial gas metering and control. The meters provide direct mass flow information as well as well-designed user friendly interfaces

 ( RS485/ 4~ 20mA/ pulse etc.) for data process. The series cover the DN range from 25 to 100 mm with an accuracy of ± ( 1.5+ 0.5FS) % or better depending on the requests. The meters can work at an environment of -20 to 60C and pressure up to 1.5 MPa. The package ensures hygienic safety and can be used for beverage and food industrial gas process such as CO. Other applications include special 2 gas monitoring in steel process, hydrogen flow control in chemical industry, process gases ( oxygen, nitrogen, helium, compressed air or argon) monitoring in manufacture, to name a few.

 

 Features and Applications

 Directly sense mass flow using thermal mass flow principle

 Proprietary MEMS sensor design for better reliability

 Standard 8 ~ 24 V power supply

 Low pressure loss reducing energy cost

 Industrial standard communication ports for easy networking and remote control

 Large data storage capability for data log and analysis

 Hazard proof ( Ex ia IIC T4) or Class I Division I, ( Zone 0) Groups A-D

 

 Specification : 

 Accuracy : ± ( 1.5 + 0.5 FS) % 

 Flow Range : 0.01 ~ 65 Nm/ sec ( e.g. DN50: 0.06 ~ 400 Nm / hr) 

 Environment Temperature : -20 ~ + 60° C

 Humidity : < 95% RH( No icing or condensation) 

 Display : Flow rate and accumulated flow

 Data Storage : Accumulated flow; flow rate; max. 3000 items

 Calibration : Air @ 20 ° C; 101.325 kPa

 Protection : IP65

 Ex Proof Ex ia IIC T4 

Related Articles :