Selasa, 11 Oktober 2016

Flow Controller Kofloc


 High Grade Metal Flow Controllers
MODEL 5100 SERIES
 Model 5100 Series Mass Flow Controller/Meter features weldless structure, metal seals, accurac y of ≤±1%, re-sponse of ≤±1 second and other basic performance con-ditions required for semiconductor process control, and additionally, has achieved a significant price reduction.

Features

-High accuracy and high response are achieved by the flow sen-sor with temperature-  following current difference detection.

-A normally-closed solenoid valve is employed.
-A low leak rate is achieved by the weldless structure and metalseal.
-The dead volume is reduced thanks to the diaphragm seat valve.
-The face-to-face and body dimensions and the wiring tie-inpoints are designed to  facilitate replacement of devices made by other companies. 
Standard Spesifications
Flow range (N2 equivalent,
20
/1 atm)
1 SCCM–20 SLM (The conditions are freely selectable)
Sensor
Thermal mass flow sensor
Valve type
Proportional solenoid valve (closed when not energized)
Control range
2–100% (F.S.)
Response
1 sec. or less (0–100% within ±2% typical)
Accuracy
±1% F.S. (Accuracy guaranteed at 15–35)
Repeatability
±0.2%F.S.
Operating differential
pressure
F.S. ≤ 5 SLM: 50–300 kPa
F.S. > 5 SLM: 100–300 kPa
Option: Low differential pressure (LP) specification is available depending on conditions.
Allowable operating pressure
300 kPa (G) or less
Proof pressure
980 kPa (G)
Leak rate
1 × 10-11 Pa·m3/s  or less
Allowable ambient temperature
0–50
Allowable ambient humidity
10–90% (No condensation allowed)
Materials of parts in
contact with gases
Body: SUS316L
Diaphragm:SUS316L
Valve seat: PTFE
Sealing: SUS316L, Ni, Au
Option: SUS seal (SU), inner surface polish (KP)
Electric connection
Dsub 9-pin connector as per KFC Standard (Compliant with SEMI Standard)
Flow rate input signals
0–5 VDC (Input impedance: 1 MΩ or more)
Flow rate output signals
0–5 VDC (External load resistance: 250 kΩ or more)
Required power supply
+15 VDC (±5%) 100 mA, −15 VDC (±5%) 200 mA
Joint (Main unit bore)
Standard: 1/4 VCR equivalent Option: 1/4 SWL
Weight
Approx. 1000 g

Harness Layout
 Pin Assigment of Dsub 9-pin Connector per KFC Standard
Pin No
Signal
Pin No.
Signal
1
Input valve open/close operation
6
Flow input Hi
2
Flow output 0-5 V
7
Flow output COM
3
+15 VDC power source
8
Flow input Lo
4
Power source COM
9
Output valve voltage
5
-15 VDC power source


Because a differential input system in used for the product, pin 4 (power source COM) and pin 7 (flow outpum COM) are connected inside the mass flow controller while pin 8 (flow input Lo) is isolated. In case of a single-ended connection , connect pin 8 to pin 4


Flowmeter Kofloc


Compact Readout Unit
MODEL CR-400
The CR-400 readout unit, when connected to your mass flow control-ler or meter with a cable, provides the key mass flow functions, such as flow measurement and control as well as cumulative flow calcula-tions and flow event outputs. This readout unit offers RS-485 commu-nications capability, so multiple readout units can be controlled online by a host computer. * The CR-400 is fully compatible in size with the CR-300.
Features
  1. Total flow is displayed in 8 digits : The upper 4 digits and the lower 4 digits are shown alternately.
  2. Various event outputs are available.
  3. With a width of 73mm and height of 73mm, it takes up little space.
  4. Equipped with forced open/close operation of mass flow controller valve.
  5. External control terminals are provided on the rear for remote control
  6. Mass flow control by RS-485 communications
  7. A lock key prevents  accidental operation.
  8. Mass flow power : ±15 VDC (300 mA)
  9. Mass flow power: ±15 VDC (300 mA) 

Standard Spesifications
Mass flow control
Flow setting, forced valve open/close operation and zero cut
Mass flow input/output
05 VDC
Number of display digits

Instantaneous flow: 4 digits, total flow: 8 digits (upper and lower 4 digits
shown alternately)
Display accuracy
Instantaneous flow: Within ±0.1% F.S. ±1 digit
Event output

2 outputs (selected from instantaneous upper limit, instantaneous lower limit,
instantaneous upper/lower limits, and set total)
Open collector output (max. rating: 50 V, 50 mA)
Power consumption
Approx. 25 W
AC power supply
85264 VAC, 48440 Hz
Weight and dimensions
Approx. 400 g, 73 W × 73 H × 119.5 D mm


Kamis, 29 September 2016

Human Machine Interface (HMI) Type 1060


Detail Human Machine Interface (HMI) Type 1060
Human Machine Interface (HMI) Type 1060


Description
SmartPanels are new Human Machine Interface (HMI) / Operator Interfaces, WinCE 6.0, LED technology, Wide panels, higher resolution, and four sizes in 4.3”, 7”, 10” & 15”. Ethernet, USB host, 2 Serial ports, SD, Audio input/output. Extensive connectivity to MPI/Profibus-DP, ProfiNet, DeviceNet, EtherNet/IP. CANopen,BACnet/IP & CC-Link. Metal/Stainless steel enclosures for rugged environments. Vertical/Horizontal installation. IP66K for Food, Beverage, Pharma and Oil & Gas.
As a professional and experienced manufacturer, we supply high-performance and quality human machine interfaces (HMI), which are also called operator panels,operator interfaces, operator interface terminals, HMI, industrial HMI, HMI screen, and HMI touch screen.

Features
•Six models in four sizes of 4.3”, 7”, 10” & 15”

•Two low-cost models HMI 450 & 730 with optional Ethernet and SD slot, three high-performance HMI 750, 1050, 1060 (wide screen) & 1550 with standard Ethetnet and SD slot.

•Touch panels, higher resolution and all in 65536 colors

•USB host, 2 Serial ports.

•Net works of Profibus-DP, ProfiNet, DeviceNet & EtherNet/IP, CANopen, CC-Link.

•Advenced and reliable WinCE 6.0 platform with more features for efficient and sophisticated control solutions

•HMI 750, 1050, 1550 standard aluminum front bezels, optional stainless steel fronts for food, beverage, pharmaceutical industries

•Rugged stainless steel front bezels with IP66K for high protection on dust & water, and polished surface for easy cleaning

•Large memory of 128 MB Flash, 256MB SDRAM, sound input + output, 3DI + 3DO

•USB Host port used for Keyboard, USB stick and mouse

•Horizontal or vertical installation and display

•Wide range of power supply 11-36 VDC or 90-250 VAC

•LED backlight for even-color displays and long lifetime

•Open WinCE 6.0 Core & Professional panels for OEM business


Specification


1.Display

•Size : 10"

•Resolution (W x H in pixels) : 1280 x 800

•Display type : TFT wide touch screen

•Colors : 65,536

•Touch screen Type : Resistive analog

•Active Display Area ( W x H mm ) : 217 x 135

•Display position : Both horizontal & vertical

•MTBF backlight at 25 °C : 50,000 hrs

•Backlight : LED

•Brightness Adjustment : Yes

•Screen Saver : Yes

•Language Fonts : Unicode including Simplified and Traditional Chinese, Japanese & Korean

2.Main Hardware

•Processor, CPU speed : ARM Cortex-A8, 1Ghz

•Flash Memory (ROM) : 128 MB

•SDRAM (RAM) : 256 MB

•Operation System : WinCE 6.0

•Real Time Clock : Yes

•Buzzer : Yes

•Sound Input+Output,3DI+3DO : N.A.

•SD card slot : Option

3.Interfaces

•RS232C, DB9 Male : 1

•RS232C/ RS422/ RS485, DB25 Female : 1

•Ethernet 10/100 Mbps, RJ45 : Option

•USB Host : 1

4.Other Network

•PROFIBUS-DP, PROFINET : Option

•DeviceNet, EtherNet/IP : Option

•CANopen : Option

•CC-Link : Option

5.General Specification

•Power Supply : 11-36VDC, 90-250VAC

•Consumption (w/o sound output) :15 W

•Power on LED indicator : Yes

•Outer dimensions (W x H x D mm) : 279 x 179 x 63

•Mounting depth (mm) : 51

•Panel cutout (W x H mm) : 197+1 x 141+1

•Protection : IP65 front, IP20 rear

•Front bezel, housing : alumunium, plastic

•Stainless Steel front bezel (option) : Option, IP66K

•Installation : Panel Mount

•Net Weight (Kgs) : 3.6


VIDEO

ENTER-TAB1-CONTENT-HERE

RECENT POSTS

ENTER-TAB2-CONTENT-HERE

POPULAR POSTS

ENTER-TAB3-CONTENT-HERE
 

Flowmeter Indonesia | Information for kind of measurement Copyright © 2010 LKart Theme is Designed by Lasantha