Smallest self-latching coaxial 50 Ω connectors.

Smallest self-latching coaxial 50 Ω connectors.

Description: 

• Coaxial 50 Ω

Main Features: 

• Push-Pull self-latching
• Over 15 shell styles
• Temp. range -55°C to 230°C
• Shielded
• Solder or print contacts

• IP50
• For cable ø 1.8 to 2.8 mm

Product finder ID: 

Initiate a part search with parameters corresponding to this Serie.

Coaxial 50 Ω self-latching connectors, the basis of the NIM-CAMAC standard.

Coaxial 50 Ω self-latching connectors, the basis of the NIM-CAMAC standard.

Description: 

• Coaxial 50 Ω
• Triaxial

Main Features: 

• Push-Pull self-latching
• Over 40 shell styles
• Temp. range -55°C to 250°C
• Shielding:
> 90dB at 10Mhz
> 70dB at 1 Ghz
• Solder or crimp contacts

• IP50
• For cable ø 1.5 to 5 mm

Product finder ID: 

Initiate a part search with parameters corresponding to this Serie.

Self-latching plastic connectors with alignment key for medical applications.

Self-latching plastic connectors with alignment key for medical applications.




Description: 

• Multipole 2 to 34 contacts
• Voltage mains
• Fluidic
• Mixed contacts in 2P and 3P
series with:
Coaxial 1 contact
High voltage 1 contact
Fibre optic 1 contact
Fluidic 1 or 3 contacts

Main Features: 

• Push-Pull self-latching
• 3 sizes
• Several keying options
• 6 colour codings
• Over 12 shell styles
• Temp. range -50°C to 170°C
• IP 64/66 options
• White, gray or black outershell

• IP50
• For cable ø 2.7 to 9.5 mm

Product finder ID: 

Initiate a part search with parameters corresponding to this Serie.

Watertight self-latching multipole connectors with alignment key

Watertight self-latching multipole connectors with alignment key

Description: 

• Multipole 2 to 32 contacts

Main Features: 

• Push-Pull self-latching
• 3 sizes
• 3 keying options
• Temp. range -55°C to 200°C
• Solder, crimp or print contacts

• IP68

Product finder ID: 

Initiate a part search with parameters corresponding to this Serie.

Watertight self-latching connectors with stepped inserts for alignment (of multipole version) and rugged housing for extreme working conditions.

Watertight self-latching connectors with stepped inserts for alignment (of multipole version) and rugged housing for extreme working conditions.

Description: 

• Unipole
• Coaxial 50 and 75 Ω
• Multipole 2 to 106 contacts
• Triaxial 50 and 75 Ω
• High voltage
• Multi or mixed contacts with:
Coaxial 1 to 8 contacts
High voltage 1 to 8 contacts
• Thermocouple 2 to 6 contacts

Main Features: 

• Push-Pull self-latching
• 7 sizes
• Multipole with stepped inserts
• Over 22 shell styles
• UL recognized
• Temp. range -55°C to 200°C
• Solder or print contacts
• Shielding:
> 95dB at 10Mhz
> 80dB at 1 Ghz

• IP66 / IP68
• For cable ø 1 to 30 mm

Product finder ID: 

Initiate a part search with parameters corresponding to this Serie.

Watertight self-latching multipole connectors with alignment key

Watertight self-latching multipole connectors with alignment key

Description: 

• Multipole 2 to 64 contacts
• Multi or mixed contacts with:
Coaxial 1 to 14 contacts
Fluidic 1 to 14 contacts
High voltage 1 to 21 contacts
Fibre optic 1 to 14 contacts
• Fibre optic
• Thermocouple 2 to 64 contacts

Main Features: 

• Push-Pull self-latching
• 6 sizes
• 9 keying options
• Over 28 shell styles
• UL recognized
• Temp. range -55°C to 200°C
• Solder, crimp or print contacts
• Shielding:
> 95dB at 10Mhz
> 80dB at 1 Ghz

• IP66 / IP68
• For cable ø 1 to 23.5 mm

Product finder ID: 

Initiate a part search with parameters corresponding to this Serie.

The original standard self-latching connectors with stepped inserts for alignment (of multipole version).

The original standard self-latching connectors with stepped inserts for alignment (of multipole version).

Description: 

• Unipole
• Coaxial 50 and 75 Ω
• Multipole 2 to 106 contacts
• Triaxial 50 and 75 Ω
• High voltage
• Multi or mixed contacts with:
Coaxial 1 to 8 contacts
High voltage 2 to 8 contacts
• Thermocouple 2 to 6 contacts

Main Features: 

• Push-Pull self-latching
• 8 sizes
• Multipole with stepped inserts
• 9 colour codings
• Over 50 shell styles
• UL recognized
• Temp. range -55°C to 250°C
• Solder or print contacts
• Shielding:
> 75dB at 10Mhz
> 40dB at 1 Ghz

• IP50
• For cable ø 1 to 30 mm

Product finder ID: 

Initiate a part search with parameters corresponding to this Serie.

Standard self-latching multipole connectors with alignment key

Standard self-latching multipole connectors with alignment key

Description: 

• Multipole 2 to 64 contacts
• Multi or mixed contacts with:
Coaxial 1 to 14 contacts
Fluidic 1 to 14 contacts
High voltage 2 to 21 contacts
Fibre optic 1 to 14 contacts
• Thermocouple 2 to 64 contacts
• Fibre optic
• Fluidic

Main Features: 

• Push-Pull self-latching
• 8 sizes
• 13 keying options
• 9 colour codings
• Over 60 shell styles
• UL recognized
• Temp. range -55°C to 250°C
• Solder, crimp or print contacts
• Shielding:
> 75dB at 10Mhz
> 40dB at 1 Ghz

• IP50
• For cable ø 1 to 25 mm

Product finder ID: 

Initiate a part search with parameters corresponding to this Serie.

Connector Hirose H16PRM-3SE

 Connector Hirpose Type H16PRM-3SE( 71) 3 PIN. 

Gast Air Motor

 FEATURES ;

 o Foot mounting

 . Any plane operation

 . Single or dual shaft

 . Muffler AL445

 * Equipped

 with metal muffler AC98O

 RECOMMENDED

 . Filter AH103F

 . Regulator AH104R

 . Gauge A4806

 . Lubricator AH' 1 05L

 . Oil AD220 - 1 quart ( .94 litres) 

 . Repair kit K205 ( 4 Vane, Reversible) 

 . Repair kit K279 ( 8 Vane, Reversible) 

Gast Air Motor

FEATURES:

 . Hub mounting

 . Any plane operation

 . Muffler AF350

 

 . Filter AH100F

 . Regulator AH101 R

 . Gauge M807

 . Lubricator AH 102L

 . Oil AD220 -

 1 quart ( .94 litres) 

 . Repair kit K200

 ( Single Rotation) 

 . Repair kit K201 ( Reversible) 

 . Repair kit K278 ( 8 Vane, Reversible) 

 OPTIONAL

 . Foot mounting-see page 31

 . Muffler 41444 ( for additional noise 

Hydraulic Seal, Seal Kit, oil seal, o-ring, WIPER, ROD SEAL, PISTON SEAL

We Supply many kind of seal kits for many brand heavy equipment .

 Our Hydraulic Cylinder Seals and Seal Kits are suitable for use in most brands and models of Construction, Earth-Moving and Material Handling machinery.

 We have both OEM and Genuine brand seals like NOK, Kayaba, Sakagami, Hallite, HST, Koyo etc. to meet all your needs. Our inventory consists of more than 10, 000 different types and dimensions of Seals & Seal Kits. In addition, we are also able to customise Seal Kits according to your requirements and specifications to suit your machine.

 1. Boom Kit

 2. Arm Kit

 3. Bucket Kit

 4. Centre Joint Kit

 5. Control Valve Kit

 6. Pilot Lever Kit

 7. Swing Motor Kit

 8. Track Adjuster Kit

 9. Travel Motor Kit

 10. Back Up Ring

 11. Buffer Seal

 12. Centre Joint Seal

 13. Cushion Seal

 14. Dust Seal

 15. Oil Seal

 16. Oring

 17. Pilot Seal

 18. Pin Dust Seal

 19. Piston Ring Piston Seal

 20. Pump Seal

 21. Ring Seal

 22. Rod Seal

 23. Wear Ring

 24. PUMP DRIVE COUPLING

 25. DU BUSHING

 26. GEAR PUMP KIT

 27. HYDRAULIC MAIN PUMP KIT

 28. Rod Du Bushing

 Seal kits for : 

 Excavator : Komatsu, Hitachi, Kobelco, Caterpillar, Kato, Sumitomo, Samsung, Hyundai, Daewoo, Volvo, etc

 Forklift : Komatsu, Toyota, Nissan TCM, Mitsubishi 

CONNECTOR SIBAS

Specification :

 SIBAS CONTACT is a leading professional manufacturer of heavy duty connector and industry connectors. SIBAS connector has been widely used in Automatic , machine made, power and equipment industries. SIBAS connector is in conformance with the standard DIN VDE 0627, VDE 0110 and standards DIN EN 175 301-801. Main series connectors are approval by UL, CE, CSA, ROSH. There many type like such : 

 

 A. HA Series

 Compact version. The series has been developed for application in electric and electronic machinery, control units where need small installation dimension. Terminal includes screw and crimp type

 1. HA-003 : 3 Pole set, 10 A , 230/ 150 V

 2. HA-004 : 4 Pole, 10 A, 230/ 150 V

 3. HA-010 : 10 Pole, 16 A, 250 V

 4. HA-016 : 16 Pole, 16 A, 250 V

 5. HA-032 : 32 Pole , 16 A, 250 V

 

 B. HD Series

 Compact crimp version. The series has been developed for application in electronic machinery, control and communication units where need small installation dimension. Terminal only with crimp type .

 1. HD-007 : 7 Pole set, 10 A, 250 V

 2. HD-008 : 78Pole set, 10 A, 250 V

 3. HD-015 : 15 Pole set, 10 A, 250 V

 4. HD-025 : 25 Pole set, 10 A, 250 V

 5. HD-040 : 40 Pole set, 10 A, 250 V

 6. HD-050 : 50 ( 25x2) Pole set, 10 A, 250 V

 7. HD-064 : 64 Pole set, 10 A, 250 V

 8. HD-080 : 80 Pole set, 10 A, 250 V

 9. HD-128 : 128 Pole set, 10 A, 250 V

 

 C. HDD Series

 1. HDD-024 : 24 Pole set , 10 A, 250 V

 2. HDD-042 : 42 Pole set , 10 A, 250 V

 3. HDD-072 : 72 Pole set, 10 A, 250 V

 4. HDD-144 : 144 ( 72x2) Pole set, 10 A, 250 V

 5. HDD-216 : 216 ( 108x2) Pole set, 10

 

 D. HE Series

 Standard version. The series has been widely used for application in electric and electronic machinery, control units. Terminal includes screw, crimp and spring type.Cable entry thread with PG and Metric thread.

 1. HE-006 : 6 Pole set , 16 A, 500 V

 2. HE-010 : 10 Pole set , 16 A, 500 V

 3. HE-016 : 16 Pole set , 10 A, 500 V

 4. HE-024 : 24 Pole set , 10 A, 500 V

 5. HE-032 : 32 Pole set , 10 A, 500 V

 6. HE-048 : 48 Pole set , 10 A, 500 V

 

 E. HEE Series

 Standard crimp version The series has been developed for application electric and electronics control units where need compact installation dimension, especially used for application of vibration. Cable entry thread with PG and Metric thread.

 1. HEE-010 : 10 Pole set, 16 A, 500 V

 2. HEE-018 : 18 Pole set, 16 A, 500 V

 3. HEE-032 : 32 Pole set, 16 A, 500 V

 4. HEE-046 : 46 Pole set, 16 A, 500 V

 5. HEE-064 : 64 Pole set, 16 A, 500 V

 6. HEE-092 : 92 Pole set, 16 A, 500 V

 

 F. HSB Series

 High current version. The series has been developed for user with 35A via each contact.

 

 1. HSB-006 : 6 Pole set, 35 A, 690 V

 2. HSB-012 : 12 ( 6x2) Pole set, 35 A, 690 V

 

 G. HQ Series

 HQ-005 is the insert of 5 poles, crimp connection, when all the contacts are used, the inserts may be used with voltages of up to 500V, current of 16A. Hoods and housings are H3A series .

 1. HQ-005 : 5 Pole set, 16 A, 400 V

 2. HQ-007 : 7 Pole set, 10 A, 400 V

 

 H. HEAV Series

 

 HEAV is the insert poles offers a simple solution for connecting conductors from inside teh switch cabinet.user can choose screw and spring cage version . 

MF4000 Series Mass Flow Meters

 MF4000 series mass flow meters are designed for applications where manifold flow measurements. The standard flow channels are 3 mm and 8 mm in diameter, respectively.

 Plastic finishing with an easy change of the mechanical adaptors enables applications at a low cost and different environments. The meters can be used for process gas control, 

 environmental samplers and many other industrial applications.

 

 Features and Applications

 Designed for low gas flow in fixed flow channel of 3 mm and 8 mm, with accumulated flow register

 Compact design ready for manifold assembly

 Fast response time for solutions of critical applications

 Excellent for manifold process gas monitor and control

 Exchangeable mechanical connectors for easy installation at different applications

 Intrinsic safe enclosure 

HA serie 3 poles

 ( 1) Rated Voltage: 250V ( screw connection) , 400V( spring cage connection)

 ( 2) Rated Current: 10A

 ( 3) Hoods and housings with metal and plastion version. 

MF-GD Low Pressure mass flow meters

Deskripsi:

 MF-GD series low pressure mass flow meters are designed for all low pressure industrial gas metering and control. The meters substantially reduce the installation cost as well as other logistical cost. In addition, the all electronic meters provide easy data access as well as remote data networking capabilities. 

Transmitter Humidity EE23

The humidity transmitter EE23 stands for multifunctionality, highest accuracy, easy mounting and service. The new IP65 water proof housing concept offers easy installation and the possibility for fast exchange of the sensor unit for service purposes.

 Following models are available for selection: 

 

 A and B versions are dedicated for wall or duct mounting

 C version with the remote sensing probe has a working temperature range -40...120 ° C

 H version remote miniature probe for concealed mounting ( e.g. in museums...) or in tight spaces

 Easy configuration of the humidity and temperature outputs is made possible by the innovative design of the EE23 electronics. One can select between various current or voltage output signals.An optional hygrostat output, display, sensors with a special coating and cable outlets via connectors complete the wide range of offerings. 

Humidity EE08

 The EE08 is designed for highly accurate humidity ( RH) and temperature ( T) measurement over a wide working range.

 Calibration data as well as linearization and temperature compensation functions are stored in the probe. The optional connector makes the EE08 easily interchangeable.

 

 The RH and T measured values are available on the analogue outputs ( 0-1/ 2.5/ 5V) or on the E2 digital interface.

 

 With its compact size, very low power consumption, short start-up time, and 4.5-15V DC supply voltage, The EE08 is ideal for use in battery operated systems.

 

 For meteorology and other outdoor applications, the EE08 can be used with an optional radiation shield.

 

 The optional configuration kit allows users to set the output scaling, as well as one or two point adjustments for RH and T.

 

 Key Features

 

 meteorology, weather stations

 hatcheries and incubators

 climatic chambers

 green houses, storage rooms

 artificial snow machines

 battery operated devices

 

 Typical applications

 

 interchangeable

 configurable

 compact size

 high accuracy

 wide working temperature range

 low power / short start-up time 

Hygrometer EE02

The new hygrometer EE02 is the combination of high accuracy measurement technology with modern design. The relative humidity and temperature values with trend indication are alternating on the large display.

 

 High quality E+ E sensor technology and state of the art microprocessor based electronics result in highest accuracy and long term stability. The very low power consumption allows battery operation and independence from external power supply. The standard batteries, replaceable by the user, have life a time about 2 years. Typical applications are climate monitioring in office spaces, food stores, laboratories and private areas. EE02 thermo - hygrometers are also available as OEM version without the E+ E logo or upon request with your company logo. So these devices are also very nice gifts and ideal giveaways. 

Gerand Flowmeter

 GERAND FLOW METERS

 MODEL-M FIRE PUMP TEST METER

 - RATING 175 PSI -

 A calibrated venturi and attached GPM meter installed on the discharge of a fire pump to accurately determine pump performance.

 6" dial meter is shipped for mounting on venturi bracket. If meter is to be remote mounted, consult factory on special hose lengths.

 the most common and additional Model " M" FM approved pump GPM/ Line size combinations of fire pump test meters.

 Dual LPM/ GPM Scales Available.

 OPERATING INSTRUCTIONS FOR GERAND FIRE PUMP TEST METER

 1. Close system OSY Valve " A" .

 2. Open By-Pass valve and " B" Butterfly Throttle Valve.

 3. Purge meter located on venturi as follows: 

 Open station shut-off valves ( below meter) and vent valves ( above meter) .

 When a steady stream of water is passing through each plastic hose, meter is purged of air. Close vent valves after air purging.

 4. Start fire pump and read meter in GPM.

 5. Refer to pump GPM requirement and adjust Throttle Valve for this requirement.

 6. After test, open OSY Valve " A" and close By-Pass and " B" Valves. . 

Gast Air Motor

 Gast Manufacturing , Inc. designs and manufactures quality air-moving products - vacuum pumps , compressors, air motors, Air gear motors, vacuum generators , regenerative blowers and Smart Air technology and thoroughly dependable, which include :

 

 A. piston air compressors and vacuum pumps are built to withstand the most rugged operating conditions, with corrosion-resistant materials used for critical internal parts. These air compressors and vacuum pumps are available in motor mounted and separate drive Compressor . Model : 

 1. Model 1L , 2L , 3L , 4L , 5L , 6L , 

 7L , 8L

 2. Model : 1H , 2H , 3H , 4H , 5H, 

 6H, 7H , 8H

 3. Moodel : PAB , PBB , PCA

 4. Model : 1VAF , 1VSF , 1VBF

 5. Model : 4VSF , 4VCF

 6. Model : 5VSF , 5VDF

 7. Model : VAB , VBB , VCD

 

 B. ROC-Rï ¿ ½ ( Rocking Piston Compressors & Pumps ) 

 

 The outstanding performance and flexibility of Gast oilless Rocking Piston air compressors and vacuum pumps, available in standard, twin and miniature styles, make them the ideal choice for countless applications .

 

 ï ¿ ½ Bonded piston rod and bearing assembly will not slip, loosen or misalign, providing years of trouble-free performance

 ï ¿ ½ Exclusive long-life cup material ensures extensive service-free operation

 ï ¿ ½ All wetted aluminum parts are treated for corrosion protection, offering greater durability in demanding applications

 ï ¿ ½ Rigid motor shell and superior motor-to-pump alignment gives tighter tolerances and allows more consistent performance and noise levels

 

 1. Model 8R, 20R , 30R , 34R , 55R

 2. Model LOA , LAA , SAA 3, RAA, ROA

 3. ROA Lab Model

 4. Model 71R/ 72R Single Cylinder

 5. Model 71R Twin Cylinder, High Pressure

 6. Model 71R/ 72R Twin Cylinder Compressors

 7. Model 71R/ 72R Twin Cylinder Vacuum Pump

 8. Model 74R Single Cylinder Compressor

 9. Model 75R Twin Cylinder Vacuum Pump & Compressor

 10. Model 75R Single Cylinder Vacuum Pump

 11. Model 81R Twin Cylinder Compressor

 12. Model : 82R Twin Cylinder Vacuum Pump & Compressor

 13. Model 85R Twin Cylinder Compressor

 

 C. Rotary Vane

 Available in oilless or lubricated, motor-mounted or separate drive, Gast rotary vane compressors and vacuum pumps offer a wide choice of capabilities.

 

 ï ¿ ½ Oilless or lubricated styles will accommodate a wide variety of pneumatic applications

 ï ¿ ½ Self-lubricating, self-adjusting vanes on oilless models provide like-new efficiency throughout the service life of the pump

 ï ¿ ½ Motor mounted or separate drive versions allow versatility in selecting the right pump for your application

 ï ¿ ½ Miniature through larger size models offer an extensive performance range to satisfy most any need

 

 1. Motor Mounted : 

 Model : 1531 , 0532 , 1032, 1532, 2032, 3032 , 0211, 0323-1423, RV Series , 2070 .

 2. Separate Drive

 Model : 0533 , 1033 , 1034, 1534, 0240-0740, 0465, 0765, 1550, 1065-2565, 2067-2567, 2080-4080, 3040, 4565, 5565, 6066, 1290* * 

 

 D. Air and Gear Motors

 Known industry wide for their rugged construction and reliability, Gast Air Motors and air powered Gearmotors are available in both lubricated and oilless models.

 These air motors and gearmotors are used in many industrial applications, from mixing equipment to running pump drives.

 ï ¿ ½ Self-sealing vanes take up their own wear, ensuring consistent output for thousands of hours of use

 ï ¿ ½ Variable speed capabilities allow flexibility and versatility in any number of applications

 ï ¿ ½ Cool-running operation means air motors can be used in ambient temperatures of up to 250ï ¿ ½ F ( 120ï ¿ ½ C) 

 ï ¿ ½ Non-electrical operation reduces the possibility of explosion from igniting flammable gases

 

 1. Air Motors

 Model : 1AM( A) , 1AM Stainless ( A) , 1UP( B) , 2AM( A) , 4AM( A) , 4AM Stainless( A) , 6AM( A) , 8AM( A) , 16AM( A) , NL22( B) , NL32( B) , NL42( B) , NL52( B) 

 2. Gear Motor

 Model : 1AM-NRV, 1UP-NRV, 4AM-RV

 10: 1 gear ratio, 4AM-RV 15: 1 gear ratio, 4AM-70C 20: 1 gear ratio, 4AM-70C 40: 1 gear ratio, 4AM-70C 60: 1 gear ratio, 6AM-22A 10: 1 gear ratio, 6AM-22A 20: 1 gear ratio, 6AM-22A 40: 1 gear ratio, 8AM-32A, 16AM-13

 

 E. Diaphragm air compressors and vacuum pumps.

 If you need a small, quiet source of vacuum or pressure, you' ll find the unit for your application in our line of oilless diaphragm air compressors and vacuum pumps.

 ï ¿ ½ Bonded connecting rod and bearing assembly provides strength and durability

 ï ¿ ½ Standard and miniature models are available for a wide range of performance options

 ï ¿ ½ Chemical resistant materials on miniature models provide for superior corrosion resistance

 ï ¿ ½ Several options for AC and DC motors are available to satisfy virtually any electrical requirement

 ï ¿ ½ For a general overview of our diaphragm/ miniature plastic line, download the diaphragm page from our full-line catalog ( pdf format, 143KB) .

 Model : 2D, 3D , 5D, 5D, 10D, 10D, 15D, 15D, 15D, 22D, 22D, 8R, 8R, MOA, MAA, DOA, DOA V163-BN, DAA

 

 F. Linear Pumps

 For applications requiring extremely quiet, highly efficient operation and simple maintenance, our oilless linear pumps have found widespread use in the medical, industrial, chemical, environmental, and scientific industries.

 Smooth air flow makes these models ideally suited for applications requiring consistent air flow

 Electromagnetic oscillation eliminates sliding parts, minimizing power consumption, offering high efficiency and long-term continuous operation

 Oilless operation means exhausted air is always clean and particle-free

 Low noise level due to innovative design considerations in the pneumatic circuit and mechanical construction

 

 Model : DDL8, DDL8B, DDL15, DDL15B, DDL30, DDL30B, DDL40, DDL40B, DDL60, DDL80, DDL120, DDL150

 

 G. Regenerative Blowers

 Gast' s Regenair regenerative blower line for high volume vacuum or compressed air applications offers motor-mounted, separate drive, and models with explosion-proof motors used in Soil Vapor Extraction ( SVE) .

 ï ¿ ½ Double-sealed, permanently lubricated bearings on many models minimize maintenance while maximizing performance

 ï ¿ ½ The design ensures exhausted air is always clean and oil-free

 ï ¿ ½ Integrated mufflers on single ended units minimize operating noise and eliminate the hazard of an exposed impeller

 ï ¿ ½ Strong fan cooling helps dissipate heat around bearings and impeller housing, prolonging bearing life and allowing cooler air delivery.

 ï ¿ ½ All blower models shown are equipped with UL & CSA certified motors except separate drive models

 

 1. Standard Motor Mounted Models

 Model : R1, R2, R3, R4, R4P, R5, R6, R6P, R6PP, R7, R7P, R9, R9P

 2. High Pressure Motor Mounted Models

 Model : R4H, R4M, R6PS, R7H, R7S, R9S

 3. Explosion Proof Motor Models

 Model : R3105N-50, R4110N-50, R4310P-50, R4P115N-50, R5125Q-50, 

 R5325R-50, R6130Q-50, R6340R-50, R6P155Q-50, R6P355R-50, R7100R-50, 

 4. Separate Drive Models

 Model : SDR4, SDR5, SDR6, SDR6P

 

 H. Vacuum Generators

 Low cost, compact alternative to traditional vacuum pumps in single and mutli-stage designs. Includes model numbers starting with VG.

 Gast' s vacuum generators can be used to generate vacuum economically without a single moving part.

 ï ¿ ½ ï ¿ ½ Patented design extracts maximum amount of energy from compressed air source while optimizing the level of vacuum generation

 ï ¿ ½ ï ¿ ½ Severe duty series incorporates chemical resistant anodized aluminum with viton seals and valves to handle aggressive gases

 ï ¿ ½ ï ¿ ½ Lightweight construction provides maximum flexibility and mounting ease

 ï ¿ ½ ï ¿ ½ Lack of moving parts ensures long life and minimal maintenance

 Model : 

 1. Single Stage High Vacuum Series

 Model : VG-005-00-00, VG-010-00-00, VG-015-00-00, VG-020-00-00 , 

 2. Single Stage High Flow Series

 Model : VG-007-00-00, VG-012-00-00 , VG-017-00-00, VG-022-00-00, VG-280-L0-00, VG-340-M0-00, 

 3. Multi Stage High Vacuum Series

 Model : VG-065-00-00, VG-130-00-00, VG-260-00-00

 4. Multi Stage High Flow Series

 Model : VG-075-00-00, VG-140-00-00, 5. Multi Stage Severe Duty Series

 VG-076-00-00, VG-131-00-00, VG-141-00-00, VG-261-00-00, VG-271-00-00, VG-260-02-00, VG-260-04-00, VG-260-08-00, VG-261-02-00, VG-261-04-00, VG-261-08-00

 I. Air Compressor for Dry Sprinkler Systems

 Model : UL2125

 Futures such as: 

 - Motor Mounted ( no belts or pullys) 

 - Oil Free, no lubrication required

 - Corrosion resistant internal parts

 - Compact, easy to install

 - Black paint for easy identification.

Turbine Flowmeter VTR Series

VTR SERIES

 Turbine flowmeter for fluids. Basically, the VTR series consist of a rotor, the housing and the measurement pick-up. The flow fuid activates the rotor. When the rotor blades interrupt the magnetic field lines of the pick up system, the motion of the rotor is detedted. As a result of the specific to the flow. The turbine revolution is detected using an externsl sensor. The out put signal is a flow-proportional frequency ( pulse form) . Further processing of the signal can be effected by using a separate processing and indicator unit. For safe operation, the minimum pressure should amount twicw the pressure drop, which occurs within the meter. Threaded connections maximum 250 bar, flange connections according to flange specifiations. VTR type consist of : 

 1. VTR 1010

 2. VTR 1015

 3. VTR 1015-S

 4. VTR 1020

 5. VTR 1025

 6. VTR 1040

 7. VTR 1050

 8. VTR 1075

 9. VTR 1100

 10. VTR 1150

 11. VTR 1200

 12. VTR 1250

 13. VTR 1300

 14. VTR 1400 

Electromagnetic Flowmeter Mecon

MECON

 mag-flux A

 Electromagnetic flowmeter for versatile applications

 Our mag-flux A type flow sensors are precision measurement devices, suitable for determining the flow rates of nearly any electrically conductive liquid ï ¿ ½ including substances such as sludge, pulp and paste.

 Due to its pulsed constant field ( DC) magnetic field technology, the instru-ment can measure flow rates up to 10 m/ s ( 32.8 ft/ s) at a minimum liquid conductivity of 3 ï ¿ ½ S/ cm with high precision and drift free..

 Applications : 

 - water & waste water

 - chemical & pharmaceutical industry

 - food & beverage

 - mining

 - cement & minerals

 - pulp & paper

 - steel industry

 - energy management . 

Mini Level Switch Spess SLF

 Description :

Model : SLF-10S-A

Material : SUS 304

Working Temperature : -10 ~ 100 deg C

Float Ball size : 41 x 123 mm

Connection : 1~1/2" PT

Connector Harting Han Kit 003

Description :

Han-Kit Complate Connector Sets

Industrial Connectors Up to 500 /16A

Han-Kit®-3AGM 

Hood  Han® 3 A straight

Bulkhead mounted hous.

1)

   Han® 3 A straight

Material  Die cast zinc alloy

Protection degree2)

  IP 67

Cable gland  M20, metal

Cable diameter  5 - 9 mm / 6 - 12 mm

Insert  Han® 3 A, 3-pins + PE

Screw terminal  1-2.5 mm², AWG 18-14

Connector Harting Han Kit 004

Description :

Han-Kit®-4AGM
Hood  Han® 3 A straight
Bulkhead mounted hous.
1)
   Han® 3 A straight
Material  Die cast zinc alloy
Protection degree2)
  IP 67
Cable gland  M20, metal
Cable diameter  5 - 9 mm / 6 - 12 mm
Insert  Han® 4 A, 4-pins + PE
Screw terminal  1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
  10 A  230/400 V  4kV  3

Connector Harting Han Kit 10A

Description :

Han-Kit®-10A
Hood1)
   Han® 10 A
Material  Die cast aluminium alloy
Protection degree2)
  IP 65
Cable gland  M20, metal
Cable diameter  5 - 9 mm / 6 - 12 mm
Insert  Han® 10 A, 10-pins + PE
Screw terminal  1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
  16 A  250 V  4kV  3

Connector Harting Han Kit 10A

Description :

Han-Kit®-10A
Hood1)
   Han® 10 A
Material  Die cast aluminium alloy
Protection degree2)
  IP 65
Cable gland  M20, metal
Cable diameter  5 - 9 mm / 6 - 12 mm
Insert  Han® 10 A, 10-pins + PE
Screw terminal  1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
  16 A  250 V  4kV  3

Connector Harting Han Kit 16

 Description :

Han-Kit®-16A
Hood1)
   Han® 16 A
Material  Die cast aluminium alloy
Protection degree2)
  IP 65
Cable gland  M20, metal
Cable diameter  5 - 9 mm / 6 - 12 mm
Insert  Han® 16 A, 16-pins + PE
Screw terminal  1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
  16 A  250 V  4kV  3

Connector Sibas HSB 006

Description :

Type : HSB-006-M

           HSB-006-F
Hood with Housing 

Rated current :16A

Rated voltage :690V

Terminal : screw terminal

Connector Sibas HA004

Description :

Type : HA-004-M

           HA-004-F
Hood with Housing 

Rated current :10A

Rated voltage :230/400V

Terminal : screw terminal

Connector Sibas HA010

Description :

Type : HA-010-M

           HA-010-F
Hood with Housing 

Rated current :16A

Rated voltage :250V

Terminal : screw terminal

Connector Sibas HA Series

Description :

Type : HA-016-M

           HA-016-F
Hood with Housing 

Rated current :16A

Rated voltage :250V

Terminal : screw terminal

Connector SIBAS HE Series

Description :

Type : HA-032-M

           HA-032-F
Hood with Housing 

Rated current :16A

Rated voltage :250V

Terminal : screw terminal

Float Level Switch

Descripption :
Rotary Paddle Switch
Contact load: AC250V, 10A
Frequency: 50/ 60Hz
Control range: 0.18-10M
Float Material: STS304 stainless steel )
Container pressure: 1 bar.
Operating temperature: 10-50

Gast Air Motor

Description :

2AM-NRV-22F

(4 Vanes, Reversible)

FEATURES

• Hub mounting

• Any plane operation

• Metal muffler AC980 adds 2" height

when installed

Sage 200 Thermal Mass Flow Meter

Specifications

Accuracy: +/– 1% of reading plus 0.5% of full scale

Repeatability: 0.2% of reading

Low End Sensitivity: 5 SFPM (1 SCFM in 6″ pipe)

Response Time: 1 second time constant

Turndown: 100:1

Resolution: 1000:1

Power: 24 +/-10% VDC or 90 – 265 VAC

Output: 4-20 mA

Pulse: 100 mA maximum

Isolated: External powered 4-20 and pulse

Modbus: RS 485 RTU optional

Ratings: Class I, Division 2, NEMA 4, CE

Ambient Temperature: –40 to 150° F (–40 to 65° C)

Type: Insertion probe (1/2″ diameter), flow body (1/4″ to 4″)

Materials: 316 stainless steel and Hastelloy C

Process Temperature Range: –40 to 450°F (–40 to 230° C)

Process Pressure: Max 500 psig